How To Enable Options As User - iStorage datashur PRO Manuel D'utilisation

Instructions
1. Press KEY button once
2. Within 10 seconds begin to enter the User PIN
(default User PIN 11223344)
3. Press the KEY button once
4. Press KEY button twice (double-click)
5. Within 10 seconds begin to enter New User PIN
6. Press KEY button twice (double-click)
7. Within 10 seconds begin to re-enter New User PIN
8. Press KEY button twice (double-click)
Note: If a mistake was made while defining a new PIN or the procedure was not completed, the drive will retain
the old PIN.

5. How to enable Options as User

The Options mode will allow the User to perform different functions such as enabling and disabling the datAshur PRO as
'Read-Only', setting a 'Timeout' automatic lock and determining the version of the device.
The table below illustrates how to access the Options mode, sections 6 - 10 describe how to perform the various functions.
Instructions
1. Press KEY button once
2. Within 10 seconds begin to enter your User PIN
3. Press the KEY button once
4. Press the KEY button 3 times - treble
click
#8
LED LED State
Red, Green
and then the
(if Blue
PIN has been set up)
Red LED will continue to blink
Red solid LED changing to
indicating successful User PIN entry
Blue LED blinks
Blue LED continues to blink
Green
Green
Red solid LED changing to
indicating User PIN change successful
LED LED State
Red, Green
and then the
(if Blue
PIN has been set up)
Red LED will continue to blink
Red solid LED changing to
indicating successful User PIN entry
Green
&
awaiting new instructions in OPTIONS mode.
www.istorage-uk.com
& Blue LED's will flash together once
Red LED will continue to blink
LED also blinks this indicates an Admin
Green
LED blinks
LED continues to blink
Green
& Blue LED's will flash together once
Red LED will continue to blink
LED also blinks this indicates an Admin
Green
and Blue LED's blinking together
solid LED
solid LED
solid LED