Summary Of Fluorescence Observation Procedures (B-510Fl); Summary Of Fluorescence Observation Procedures (B-510Bld1/Ld2) - Optika Italy B-510 Série Manuel D'utilisation

14. Summary of fluorescence observation procedures (B-510FL)
Set the power supply switch to "I" (ON) and
wait for the arc to stabilize (5 or 10 minutes).
Place a specimen on the stage.
Insert in the light path the filtercube
suitable for the specimen
Insert the objective into the light path
and focus the specimen.
Adjust until you obtain a bright and even field of view
Insert the shutter when the microscope is
15. Summary of fluorescence observation procedures (B-510LD1/LD2)
Turn on the microscope using the main switch.
Place a specimen on the stage.
Insert in the light path the filtercube
suitable for the specimen
Insert the objective into the light path
and focus the specimen.
not used for a short time
Begin observation
Insert the shutter when the microscope
is not used for a short time
Begin observation
(Used commands)
Fluorescence power supply
Slide holder
X/Y movement knobs
Fluorescence filter slider
Shutter
Nosepiece
Coarse and fine focus knobs
Lamp housing focussing and
Shutter
(Used commands)
Main switch
Slide holder
X/Y movement knobs
Fluorescence filter slider
Shutter
Nosepiece
Coarse and fine focus knobs
Shutter
Page 66
centering screws
(Chapter)
(13)
(9)
(5)
(13)
(13)
(5)
(5)
(13)
(13)
(Chapter)
(9)
(9)
(5)
(13)
(13)
(5)
(5)
(13)