Table des Matières
Publicité
NON-
COMBUSTIBLE
BOARD 8" X 34"
SUPPLIED BY
MANUFACTURER
OR A 5" AIR GAP
WITH CUSTOM
SURROUND
NON COMBUSTIBLE MATERIAL/ MATIERE NON COMBUSTIBLES
Non-combustible material will be supplied by the manufacturer. This must be installed on top of the fireplace as
shown above to meet installation codes, or a 5" air gap with covering custom surround.
Matériaux non combustibles seront fournis par le fabricant. Ce doit être installé sur le dessus de la cheminée,
comme indiqué ci-dessus pour répondre aux codes d'installation, ou un écart de 5 "de l'air avec revêtement
ambiance personnalisée.
The fireplace must be installed level and be attached to the framing with screws on either side. The
noncombustible board supplied by the manufacturer must be securely screwed to the top of the fireplace and the
steel header stud. Minimum clearances to combustibles must be maintained for safety reasons.
36.00"
STEEL STUD
32.50"
33.75"
TO TOP
OF NON-
COMBUSTIBLE
BOARD
Page 18 of 45
Publicité
Table des Matières
