Setting The Snooze Function; General Audio Playback Functions; Selecting A Playback Mode; Setting The Volume - Sonoro SO-110 Mode D'emploi

2. To switch the alarm clock off and have it come
back on after a set period of time (Snooze),
press the [SNOOZE] button on the remote con-
trol.
i
Alternatively, you can turn the click wheel
when the alarm sounds to set the snooze
time. Press the click wheel to confirm.
ð The display shows the remaining snooze
time. After the set time expires, the alarm
will sound again.
9.7

Setting the snooze function

The snooze function allows you to define a length of
time after which the alarm will go off again.
Fig. 27: Setting the snooze function
1. Briefly press the [SNOOZE] button on the
remote control in Standby mode. If the device is
switched on, press and hold the [SNOOZE]
button on the remote control until the Snooze
sub-menu appears (Fig. 27).
ð The display shows the [Snooze] symbol
(Fig. 27/1).
2. Turn the click wheel to set the duration.
3. Press the click wheel to confirm the entry.
10 General audio playback func-
tions
10.1

Selecting a playback mode

Select the desired mode to play back audio from dif-
ferent media or external devices.
Fig. 28: Selecting a playback mode
1. Switch on the sonoroRADIO.
2. Press the [MODE] button on the front of the
device until the desired mode is displayed, or
press the desired mode on the remote control.
i
Alternatively, you can also rotate the click
wheel after pressing the [MODE] button to
toggle through the different modes. Press the
click wheel to confirm the mode.
ð The display shows the selected mode
(Fig. 28).
10.2

Setting the volume

Fig. 29: Setting the volume
1. Turn the click wheel to increase or decrease the
volume (Fig. 29).
ð The display shows a volume control.
10.3

Muting the audio playback

Mute
Fig. 30: Mute
1. In playback mode, briefly press the [MUTE]
button on the top of the device or the remote
control to turn off the sound during playback.
ð The display shows the text [Volume Mute]
(Fig. 30).
Switching on the sound
2. To turn the sound back on, press the [MUTE]
button on the device or the remote control
again, or turn the click wheel clockwise.
89