Wlist Of Menu Items And Settings - Panasonic AW-PH400E Mode D'emploi

Pan/Tilt Control Panel AW-RP400
Menu settings
w List of menu items and settings
Menu item
PRIORITY
DIRECTION
TILT RANGE
SPEED WITH ZOOM POS.
MEMORY LENGTH
PRESET SPEED
IRIS CONTROL
ROTATION SWITCH
OPTION SWITCH
CONTROL SELECT MODE
BUZZER
AUTO RUN
SD CARD
PRIORITY (MASTER/SLAVE)
When 2 pan/tilt control panels (AW-RP400) have been connected, the priority of the CONTROL SELECT buttons is to be set.
When MASTER is selected as the setting, the master AW-RP400 has priority; when SLAVE is selected, the slave AW-RP400
has priority.
If the AW-RP400 with a high priority has selected the pan-tilt heads, which were selected by the AW-RP400 with a low priority,
the CONTROL SELECT button lamps on the AW-RP400 with the low priority start flashing to indicate that the control rights
have been ceded to the other control panel. This setting is performed using the master AW-RP400.
Setting
MASTER, SLAVE
PAN
TILT
ZOOM
NORMAL, REVERSE
FOCUS
IRIS
ROTATION
190°, 300°
OFF, 1, 2, 3
60s, 120s, 300s, 600s
1 to 25
BOTH, RP400, CB400
ROTATION, FOCUS, ZOOM, IRIS
A
B
C
D
NOT USE, DEF, WIP, HEATER/FAN,
LAMP, OPTION, ND, EXT, AF
E
F
G
H
INTERLOCK, UN-INTERLOCK
OFF, ON
START No. 1 to 50
END No. 1 to 50
INTERVAL 1s to 30s
OPERATE STOP, RUN
STORE, LOAD
37 (E)
Description Initial value
MASTER
NORMAL
190°
OFF
60s
25
BOTH
ROTATION
NOT USE
INTERLOCK
ON
1
50
1s
STOP
– – –