Function Of The Console - SPORTSTECH DFT100 Manuel

TURN ON THE DEVICE
1. To start the device, first establish a power connection.
2. Now press the power switch on the front end of the treadmill to „I". If the device is switched on, the buzzer
sounds four times.
ACTIVATE THE REMOTE CONTROL AND
START THE TREADMILL
Attach the magnetic end of the Safety key on
the grip-bar. The LED display switches to ope-
rating mode.
Now press the START button on the remote
control. The LED display shows a countdown
of 5 seconds and the buzzer sounds.
After the countdown ends the treadmill starts
to run with an initial speed of 1km/h.
FUNCTION KEYS:
1. SPEED BUTTONS +/-: As soon as the treadmill is running, press the +/- buttons to increase or decrease
the speed in 0.1km/h increments. Pressing and holding one of these buttons for more than ½ second
increases or decreases the speed continuously.
2. STOP: To stop the treadmill, press the STOP button. The device comes to a standstill and all data is reset
to the basic setting. Alternatively, you can also pull out the safety key to bring the device to an abrupt stop.
LED-DISPLAY:
The integrated LED display shows - from left to right - the calories burned (CAL), the previous time and - alter-
nating every 3 seconds - the distance traveled (DISC) and the current running speed (km/h).
The speed range of the treadmill is between 1-8 km/h, where 1 km/h is the starting speed and 8 km/h is the maxi-
mum speed.

FUNCTION OF THE CONSOLE

Power
40
Start