Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Caution: Do not attempt to remove the permanently mounted spring loaded side discharge cover at any
time.
ADJUSTING THE CUTTING HEIGHT
Warning! Cutting height adjustments should only be performed after the engine and blades
have come to a complete stop!
It is always best to begin cutting your lawn with a higher deck height to prevent scalping your lawn.
The cutting height is adjusted with front and rear levers.
Actuate the adjustment lever and pull it to the required position. Please make sure that the lever locks into
same position.
13
Publicité
Table des Matières
Dépannage
