Side Discharge Chute - Powersmart PS2321CR Manuel D'instruction

ATTACH LOWER & UPPER HANDLE
1. Loosen two knobs and turn the folded upper handle to match the lower handle, and tighten the knob.
2. Turn the lower handle to an angle that maches the base and tighten with two screws. (Two screws are
in the accessories bag. ）
3. Lock the cable to the lower handle using cable clip.
4. Insert the recoil starter handle cable into the hook provided on the upper handle. You must engage the
start/stop control to release the recoil starter handle.
Recoil starter handle

SIDE DISCHARGE CHUTE

1. Lift the spring-loaded discharge cover located on the side of the mower.
2. Slide two hooks of the side discharge chute under the hinge pin and lower the spring on the side
discharge cover.
Cable Clip
12
Start/Stop Control