Typical Installation - Pentair MSP40 Manuel D'installation

9. For proper
operation (Model MSP40A1
or MSP40A2) make sure the
pump power cord is plugged
into the back of the piggyback
receptacle on the diaphragm
switch cord.
automatic 10. Use
completely submerged for
pumping
140° F). The MSP40 will
pump solid materials up to
1-1⁄4" (spherical) in diameter.
MSP40

Typical Installation

pump partially or
(temperature to
6099 1009
CAUTION: Do not pump
flammable liquids, strong
chemicals or salt water.
3