Engine Oil Change; Air Filter - Zipper Maschinen ZI-STE2800IV Mode D'emploi

13.3 Engine oil change

Drain the used oil quickly and completely while the engine is still warm.
For the purposes of environmental protection fill the oil in tight containers and dispose
 Pull out the drain screw (1)
 Drain the dirty oil into a suitable container
 Replace the drain screw
 Remove the dipstick
 Fill in new engine oil (15W40, 600ml) and check the
engine oil level with the dipstick
 If the level is correct (FULL) reinsert the dipstick
 Remove oil residues with a rag
 Put the machine on an even area and start the
engine. If there is sufficient oil level the low oil
alarm light will be not activated

13.4 Air filter

 Loosen the clip and remove the cover
 Remove the air cleaner case
 Remove the air cleaner
 Clean the air filter with soapy water, then rinse
with clear water and let it dry thoroughly before
reassembling
 Reassemble the air cleaner in reverse order
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-STE2800IV
Switch off the machine before starting the engine oil change!
the oil in a recycling center. Do not dispose it with household waste
A T T E N T I O N
MAINTENANCE
23