Trouble Shooting - WOLFF Junio-Stripper Mode D'emploi

A
Guarantee
The guarantee period for new Wolff machines is one year from the time of delivery/transfer to the customer,
unless another period applies pursuant to mandatory legal regulations.
When making a claim under guarantee, the invoice and/or proof of purchase must be provided. All repairs
covered by the guarantee must be carried out by a Wolff service shop recognised by us. Repairs which are
carried out by the customer and/or improperly automatically lead to a disentitlement from claims. The same is true
of improper operation and/or use.
Replacement of parts, accessories and other changes to Wolff machines
Wolff machines provide users with a high degree of safety and reliabiity. To maintain this, the condition of your
Wolff machine may not be changed from that on the date it was delivered from the factory without observing
the following rules. These rules apply for the replacement of parts, the addition of accessories and other
technical changes.
All work done on your Wolff machine must be carried out exclusively by a specialist workshop which
has suitably trained and experienced staff and the working materials required. For this, we recommend
an authorised Wolff service shop.
In the event that parts are deliberately replaced, accessories are deliberately added or other technical
changes are deliberately carried out, the customer must always consult an authorised Wolff service
shop or us, the manufacturer, before starting the work.
We urgently recommend only using safety-checked original Wolff spare parts and original Wolff
accessories which have been cleared by us, the manufacturer. These spare parts and accessories can
be purchased from your authorised Wolff service shop, which will also be pleased to assemble them
for you properly.
Original Wolff spare parts and Wolff accessories have been specially tested for their safety and
suitability for Wolff machines.
We can not sufficiently judge the safety and suitability of spare parts and accessories which are
not original Wolff parts, and are thus unable to vouch for them.
To maintain operating reliability and avoid damage, in the case of technical changes – of whatever kind
– our technical guidelines are to be observed in every case. Please also contact us at any other
time if you have any questions about your Wolff machine.
We can not assume any liability for damages caused as a result of improper work and/or violation of the above
terms and conditions.
08/2006
B
5.3 Use
The JUNIO-STRIPPER is designed to remove foam adhesive or
flooring residues. Also for the removal of floor coverings on
stairs and in unaccessable areas, as well as for removal of glass
fibre wall lining.

6.0 Trouble shooting

Trouble
Machine does not work Power supply
Undue force necessary Blade is blunt
or excessive vibration
Excessive vibration
JUNIO-STRIPPER 07, Artikel-Nr. 016876
Switch off: Press the switch at the rear part (B).
The switch gets released and the machine is switched off.
Eventual cause
Disconnected
Blown fuse
Defective cable or plug
Expendable parts are
worn out
Elimination
Have machine
repaired by a qualified
electrician
resp. change parts
Change blade
Return machine for
service and/or repair
10