Temperature Range - Topcom KIDZZZ BABYTALKER 2500 Manuel D'utilisateur

Topcom Babytalker 2500
5.6 Lullaby
5 lullabies can be played on the baby unit.
5.6.1 Remote activation:
• Press (8) on the parent unit, 'Night Light' is displayed.
• Press (11) until 'Lullaby' is displayed.
• Press (4). 'Play' is displayed.
• Press (11) to select 'Select New'
• Press (4).
• Press (11) to select the desired Melody or select 'Play All' to play all lullabies one
after the other.
• Press (8) to leave the melody setting.
• Select 'Play' and press
• To remotely deactivate the Lullaby, follow the same instructions, but select 'Stop'.
The audio level of the played lullaby can only be adjusted on the baby unit. The baby
unit will remember the set audio level.
If you press (3) on the parent unit, the lullaby will automatically stop.
PTT
5.6.2 Local activation:
• Press (20) on the baby unit. The actual selected lullaby is played.
• Press (24) to increase the audio level or
• Press (21) to select the desired lullaby.
• Press (20) to stop playing.
5.7 Temperature
In standby mode, the room temperature of the baby unit is displayed on the parent unit.

5.7.1 Temperature range

The display will indicate when the room temperature has exceeded the upper of lower limit.
• Press (8) on the parent unit, 'Night Light' is displayed.
• Press (11) until 'Temperature' is displayed.
• Press (4). 'Set Range' is displayed.
• Press (4).
• Press (11) or
• Press (4).
• Press (11) or
• Press (8) to leave the range setting.
When the limits are exceeded the display will show 'High' of 'Low' and the temperature will
flash.
8
(4) to start the lullaby.
(10) to select the desired upper limit (max 26°C).
(10) to select the desired lower limit (min 14°C).
(23) to decrease the audio level.
Topcom Babytalker 2500