Air Outlet Selection - Mitsubishi Electric CITY MULTI PFFY-P20VKM-E Manuel D'installation

9. Air outlet selection

SW5
220V
SW1
ON
OFF
1 2 3 4 5 6 7 8 9 10
SW12 SW11
0
Fig. 9-1
Note:
Be sure to operate with the main power turned off.
Description of operation
Operation
Air flow
Upper and lower air flow
Room temperature and
Conditions set temperature are dif-
ferent.
• Be sure to keep the area around the damper of the lower air outlet free of any objects.
240V
CN43
SWC
CN82
SW14
SWC
0 0
SWC
SWC
COOL
Upper air flow Upper air flow only
Room temperature is
close to set temperature
or thermo-off.
With this function, air comes out simultaneously from the upper and lower air outlets
so that the room can be cooled or heated effectively. This function is set using the
switch SWC on the address board.
How to set to blow out air from the upper and lower air outlets:
s Set the SWC to lower side (" "). (Factory setting)
Air blows out automatically from the upper and lower air outlets as shown in the table
below.
How to set to blow out air from the upper air outlet only:
s Set the SWC to upper side ("
DRY
Upper and lower air flow
(Normal condition (in
—
heating))
").
HEAT
Upper air flow
Upper and lower air flow
During defrosting op-
eration, start of opera-
tion, thermo-off
FAN
—
9