Sony IPELA PCS-TL50 Guide D'utilisation page 62

You can change the display mode manually using the following buttons.
To change the location of the window picture of videoconference
Press the PinP button on the Remote Commander.
To display the picture of videoconference only
Press the VIDEO CONF button on the Remote Commander.
Press the PC/VIDEO button again to display the picture from the computer or
video equipment only.
To display the picture of videoconference and the picture from the
computer or video equipment simultaneously
Press the PandP button on the Remote Commander.
The picture from the computer or video equipment is displayed on the left
(main picture) and the picture of the videoconference is displayed on the right
(sub picture).
To change the remote picture of videoconference to the local
picture
Press the FAR/NEAR button on the Remote Commander and change the
"Display" setting ("Far" or "Near") in the Display Control menu.
Note
The Picture-in-Picture and Picture-and-Picture features are not available while not in
communication with the remote party.
28
GB
Use as Computer Display or Video Monitor
PinP button
CONNECT/
1 2
DISCONNECT
ABC DEF
PinP
1 2 3
BACK
SPACE
GHI JKL MNO
PandP
4 5 6
CLEAR
PQRS TUV WXYZ
INPUT SELECT
7 8 9
SYMBOL
FAR/NEAR
0
ALPHA/NUM
FAR/NEAR button PandP button
VIDEO CONF button
3 4 5 6 HELP
MENU VIDEO CONF PC/VIDEO
WIDE MODE
DISPLAY
SELECT
ZOOM VOLUME BACK LIGHT
+
T
ENTER
CAPTURE IMAGE
RETURN
–
W
MIC
ON/OFF