MRA NTM Instructions De Montage page 3

GB
Read this manual carefully and check the parts list for completeness before you begin. We recommend
Number
1 MRA windshield
1 Holder, 1 pair
4 Elastic nuts M5
4 Plastic disc, 12x5x0.5mm
4 Lens head screws, M5x20mm
4 Distance sleeves 3mm
4 O-rings, 4.5x1.5
4 Flat headed screws M6x10mm
4 Washers 13x6 x0.5mm
Fitting the screen to the motorcycle:
1. Place the motorcycle on a flat surface.
2. Remove the chromium lamp ring (P1 + P2).
Important! Prior to dismantling the lamp unit, measure the size for the
height adjustment of the head lamp to ensure that the head lamp has the correct height
after assembly (P3).
3. Dismantle the head lamp (P4) and then the head lamp housing (P5).
4. Mount the supplied holding plates to the motorbike using the M6x10mm screws and the
washers and tighten the screws (P5).
5. Now assemble the head lamp housing to the motorbike and tighten the attachment screws.
Connect the head lamp to the cable harness and mount it to the head lamp housing. Adjust
the head lamp to the distance measured before (P6).
Important! Do not adjust the head lamp too high – other road users might be blinded.
6. Now remount the chromium lamp ring to the head lamp.
7. Insert the M5x20mm lens head screws including the plastic washers and the 3mm distance
sleeves in the MRA windshield (P7).
8. Mount the MRA windshield to the motorbike and tighten the screws (P8).
9. Finally check the light system for proper function.
After installation, check that all of the screws are tight; tighten them up if necessary. Repeat this at
regular intervals. Clean the screen with water, neutral soap and a sponge. Do not use solvents, alcohol or
MRA-Klement GmbH Siemensstr. 6 D-79331 Teningen Tel.: +49 7663 93890 Email: info@mra.de
Thank you for buying a MRA Windshield.
that you have your screen fitted by an authorised workshop.
Article
spirits to clean the screen as they will damage it.
MO UN T IN G IN STR UC T ION S
Kawasaki Z900RS 2018-
Article No..
--- Allen key 3mm, 4mm
11323 Wrench 12mm
Open-end spanner 12mm
10629
Cross head screwdriver
10635
10673
10872
10992
11291
10669
3
Required tools