Princess 332950 Mode D'emploi page 9

Congratulations!
You have purchased a Princess product. Our aim
is to provide quality products with a tasteful
design and at an affordable price. We hope that
you will enjoy this product for many years.
Description (fig. A)
Your 332950 Princess vacuum cleaner has
been designed for vacuuming dry substances.
The appliance is not suitable for vacuuming
wet substances. The appliance is suitable for
indoor use only. The appliance is suitable for
domestic use only.
1. On/off button / Speed control button
2. Mains cable rewind button
3. Bag-full indicator
4. Handgrip
5. Dustbag compartment
6. Release button (dustbag compartment)
7. Hose
8. Release button (hose)
9. Tube
10. Extension tube
11. Locking knob (extension tube)
12. Airflow control switch
13. Suction nozzle
14. Floor surface selector
15. Wheels
16. Parking bracket
17. Crevice nozzle
18. Hose connection
Assembly (fig. A)
Before you proceed, we need you to pay
attention to the following notes:
- Before assembly or disassembly, switch off
the appliance and remove the mains plug
from the wall socket.
Mounting and removing the
dustbag (fig. A - C)
The dustbag and the dustbag holder must be
properly mounted in order to close the cover
of the dustbag compartment.
Before you proceed, we need you to pay
attention to the following notes:
- Do not use the appliance without the
dustbag.
Mounting the dustbag
• Keep the release button (6) pressed and
open the cover (19).
• Insert the dustbag (21) into the slots (22)
of the dustbag holder (20). Slide the
dustbag (21) to the end of the dustbag
holder (20).
• Close the cover (19) until the release
button (6) clicks into place. Make sure that
the hole in the dustbag (21) aligns with the
hose connection (18).
Removing the dustbag
• Keep the release button (6) pressed and
open the cover (19).
• Remove the dustbag (21) from the dustbag
holder (20).
• Close the cover (19) until the release
button (6) clicks into place.
Mounting and removing the hose
(fig. A)
Before you proceed, we would like you to
focus your attention on the following notes:
- Before mounting the hose, make sure that
the dustbag compartment is inserted into
the appliance.
• To mount the hose (7), insert the hose
outlet into the hose connection (18) until
the release buttons (8) click into place.
• To remove the hose (7), keep the release
buttons (8) pressed and pull the hose
outlet from the hose connection (18).
Mounting and removing the tube
(fig. A)
• To mount the tube, insert the hose (7) into
the tube (9).
• To remove the tube, pull the hose (7) from
the tube (9).
9