Télécharger Imprimer la page

Automatic System - Num'axes Canifugue Small Guide D'utilisation

Masquer les pouces Voir aussi pour Canifugue Small:

Publicité

Les langues disponibles

Les langues disponibles

The flags are a temporary visual aid for your pet during the training process. They enable your pet to visualize the
area where he can move freely and the boundaries he must not cross.
We recommend installing the flags at the inner edge of the warning zone at short intervals. Do not place the flags at
the antenna wire.
Once your pet is familiar with the boundaries, the flags can be gradually removed.
Layout of your installation
Before starting the installation of your pet fencing system, it may be useful to draw a layout of the installation.
Once the installation is completed, note the location of the wire connectors on the layout you drew for future
reference. In case of connection default, you will find them more easily.
Warning
area
Stimulation
area

AUTOMATIC SYSTEM

As soon as the animal wearing a collar enters the protected area, he is warned by beep sounds.
If he continues to move forward, towards the antenna wire, the collar emits stimulations.
The antenna wire is placed on the ground, buried or raised on an existing fence.
For the system to function, the wire must form a continuous loop.
Both wires (inward and outward) must be spaced 2 meters apart.
Activate/deactivate the transmitter
Activate: connect the transmitter to the power supply by plugging the AC adapter into the power jack on the
transmitter and into a wall outlet. The green indicator light on the transmitter comes on, the transmitter is
On.
Deactivate: disconnect the AC adapter from the wall outlet. The green indicator light on the transmitter goes
out, the transmitter is Off.
NOTE: do not connect the transmitter to the power supply before connecting the antenna wire to the antenna socket.
The wire break alarm would alert you to a connexion default (ref. § Safety features – wire break alarm).
User's guide CANIFUGUE SMALL – indice A
Chasse
Diagram 4 – Sample installation
Antenna wire
By twisting the outward strand with
the inward strand, wave emission is
blocked and the animal can move
freely within this zone.
Pêche
between
both wires
Twisted
wire
Transmitter
Loisir et nature
2 m
Jardin
www.ducatillon.com
5/12
Élevage

Publicité

loading