BLUEFIN Fitness TOUR SPIN Manuel D'instructions page 7

ASSEMBLY INSTRUCTION
(cont.)
Step 2.
Slide the Handlebar Post (17) into the
handlebar post housing on the Main Frame
(16). You will have to slacken the knurled
section of the L Shape Knob (7) and pull the
knob back and then select the desired height.
Release the knob and retighten the knurled
portion. Then fix the Handlebar (18) with FLAT
WASHER (21) and L Shape KNOB (22)
NB: YOU SHOULD FIX THE HANDLEBAR
TIGHTLY
Fix the Computer (56) onto the support tube
of the Handlebar (18) with four screws (55).
Connect the sensor wire (A1 & A2).