Sunoptic Surgical LIT-051 Manuel D'utilisation Et D'entretien page 5

When replacing Headlight Module:
Position Belleville washers in recess of mounting ear. Engage clevis of headlight into place.
Align parts and push plastic rivet into place.
CAUTION: The metal portion of the fiber optic cable at the Lightsource gets hot during
operation. Allow cooling for a minimum of five minutes outside the illuminator before
touching.
LIT-051 Sunoptic Surgical
Rev. H
RECESSES
top & bottom
®
Page 5 of 35
PUSH
RIVET
BELLEVILLE WASHERS (2)
(
concave sides facing recesses)
CLEVIS
Assembled
(English)