Gas Supply Connections - ESAB ESP-150 Manuel D'instruction

SECTION 3
E. GAS SUPPLY CONNECTIONS
1. Connect the gas supplies. The cylinders may be placed and secured on the
cylinder rack of the truck. Before connecting the regulators, be sure to read,
understand, and follow all instructions packed with each regulator.
2. Connect the gas hoses to the regulators and to the proper fittings (Adaptors:
74S76, Air; 19X54, Ar/H
should be wrench tight including those that are plugged. (Fig. 14)
(3) Air Filter Regulators
Fig. 13 - Air Filter Regulator Connections
137
) on the rear panel of the ESP-150. Connections
2
P/N-36932
Select ONLY ONE
(1) Inlet Connec-
tion, NEVER BOTH,
when selecting
Plasma Gas
Fig. 14 - Gas Connections
INSTALLATION