Patton Kamado 15 Instructions De Montage Et Mode D'emploi page 32

Parts list
Parts list
Parts list
1 (1x)
1 (1x)
2 (1x)
2 (1x)
3 (1x)
3 (1x)
4 (1x)
4 (1x)
5 (1x)
5 (1x)
Prior to assembly, read the instructions carefully. Check all parts against the parts list.
Prior to Assembly: Read the instructions carefully. Check all parts against the parts list.
Prior to assembly, read the instructions carefully. Check all parts against the parts list.
Carry out assembly on a soft surface to avoid scratching the paint. Please retain this information for future reference.
Carry out assembly on a soft surface to avoid scratching the paint. Please retain this information for future reference.
Carry out assembly on a soft surface to avoid scratching the paint. Please retain this information for future reference.
For ease of assembly only loosely tighten bolts and then tighten fully when assembly is complete.
For ease of assembly on ly loosely ti ghten bolts and then tighten fully when assembly is complete.
For ease of assembly only loosely tighten bolts and then tighten fully when assembly is complete.
WARNING - DO NOT over tighten bolts; only tighten with moderate pressure to avoid damaging the bolts or
WARNING - DO NOT over tighten bolts; only tighten with moderate pressure to avoid damaging the bolts or
components of the Kamado Grill.
WARNING - DO NOT over tighten bolts; only tighten with moderate pressure to avoid damaging the bolts or
components of the Kamado Grill.
components of the Kamado Gril.
Assembly instructions
Assembly Instructions
Assembly instructions
IMPORTANT - Remove any packaging before use, but retain the safety instructions and store them with this product.
IMPORTANT - Remove any packaging before use, but retain the safety instructions and store them with this product.
IMPORTANT - Remove any packaging before use, but retain the safety instructions and store them with this product.
Ensure that the lid is closed prior to assembly.
Ensure that the lid is closed prior to assembly.
ASSEMBLY
STEP 1 - Secure the bracket (2) and the bracket (3) to using the one screw (A) with the 4 dome-headed nuts(B).
A
B
GB, IE
6 (1x)
6 (1x)
7 (1x)
7 (1x)
8 (1x)
8 (1x)
9 (1x)
9 (1x)
32
A (13x)
A (13x)
B (13x)
B (13x)
3
2