Abus Eytron JPEG2000 Dual Codec Mode D'emploi page 75

INTERVAL SETUP
INTERVAL SETUP
SWITCH INTERVAL
FULL
PIP
EVENT RECORD
EVENT UPDATE TIME
SELECT MENU ▲▼, & [ENTER]
event. The event types include Alarm, Motion and Video Loss. When an event is triggered,
it is possible that the same event keeps on being triggered for a period of time. With the
help of Event Update Time, whenever there is an event, the DVR records the starting time
and information of the event in the Event Log, and ignores the following events within the
duration set in the Event update time. The setting range of the Event Update time is from 10
seconds to 990 seconds.
ALARM SETUP
ALARM SETUP
CHANNEL
ALARM INPUT
DURATION
N.O. ................ NORMAL OPEN
N.C. ................ NORMAL CLOSE
--- ................ DISABLE
SELECT MENU ▲▼, & [ENTER]
SWITCH INTERVAL
FULL
Select here the switching interval time for
01 SEC
FULL SCREEN SEQUENCE display:
01 SEC
1 – 99 seconds.
600 SEC
PIP
Select here the switching interval time for
Picture-in-Picture display: 1 – 99 seconds.
EVENT RECORD
Event Update Time is to avoid the DVR from
recording the event logs from the same
CHANNEL
Select the camera to be changed.
CH1
01 SEC
ALARM INPUT
01 SEC
Set up the Alarm Input type.
N.C.- the alarm is triggered, when the circuit
600 SEC
turns opened.
N.O.- the alarm is triggered, when the circuit
turns closed.
DURATION
Set up a post- alarm recording duration and
the alarm output duration. The duration
setting is applied to both functions. The
setting range is from 1 second to 300
seconds.
75