Hdd Installation; Mouse Installation; Power Plugging - Abus Eytron JPEG2000 Dual Codec Mode D'emploi

6.5 HDD installation

Fitting the hard disk
1. Step: Switch off the digital recorder and open the hard-disk slot.
2. Step: Turn the handle carefully to the left and pull the HDD frame carefully out of the
slot. (Keys and fitting screws are contained in the HDD frame.)
3. Step: Push the plastic lock of the HDD frame cover down and push the upper cover
of the HDD frame back.
4. Step: Fix the hard-disk with two screws on the left and two screws on the right of the
HDD frame and then close the frame with the upper cover.
5. Step: Insert the HDD frame back into the slot, push it until engages, and turn
the handle to the right. Now lock the hard disk with the key.

6.6 Mouse installation

6.7 Power plugging

Connect mouse to the PS/2 port at rear side in
order to control the DVR by mouse.
It is also possible to use a USB mouse with a
USB->PS/2 converter.
Insert the adapter to the rear power socket of DVR.
Insert the power cable to the other side of adapter.
Plug in the power cable and
power on the DVR.
60