Abus Eytron JPEG2000 Dual Codec Mode D'emploi page 71

HDD MANAGEMENT
HDD MANAGEMENT
HDD SETUP
HDD INFORMATION
HDD REPLACEMENT SETUP
SELECT MENU ▲▼, & [ENTER]
STATUS
Shows the HDD status: empty, normal or overwrite.
CLEAR HDD
To clear the HDD data, the ADMIN's password has to be entered.
Time and date have to be set before clearing HDD
HDD INFORMATION
This menu shows the physical information of HDD (Master/Slave).
HDD REPLACEMENT SETUP
Includes SAVE DVR INFO and LOAD DVR INFO.
HDD REPLACEMENT SETUP
HDD REPLACEMENT SETUP
SAVE DVR INFO
LOAD DVR INFO
SELECT MENU ▲▼, & [ENTER]
Be sure to write down the DVR information as like NTSC/PAL,
MODEL name, HDD location (PORT 1, PORT2). When you want to
retrieve the data of the HDD, the configuration of the DVR has to be
the same.
HDD SETUP
BEGIN
Shows the start Date/Time of recorded data
on HDD (Master/Slave).
RECORD
Shows the end Date/Time of recorded data
on HDD (Master/Slave).
PLAY
Shows the previous playback Date/Time on
HDD (Master/Slave).
In order to change HDD's of the same
JPEG2000 DVR model, the information of
the recorded has to be saved.
SAVE DVR INFO
Press the ENTER button on "SAVE DVR
INFO" to save the DVR information to HDD.
If the DVR information is saved correctly,
the message "NOW CHANGE HDDDISK"
will be shown. Then power off the DVR and
change with new HDD.
71
.