Electrical Dangers - Zehnder ComfoConnect KNX C Manuel D'utilisation

Foreword
Read this document carefully before use.
With this document you can install, commission and
perform maintenance on the ComfoConnect KNX
in a safe and optimal manner. In this document the
ComfoConnect KNX will be referred to as "the unit".
The unit is subject to continuous development and
improvement. Thus the unit may be slightly different
from the given descriptions.
The next pictograms are used in the Zehnder
documents:
Symbol Meaning
Point of interest.
Risk of compromised performance or damage of
the ventilation system.
Risk of personal injury.
Questions
Speak to your supplier when you have any questions
or would like to order a new document. The contact
details of the manufacturer can be found on the back
page of this document.
All rights reserved.
This documentation has been made with the utmost care. The publisher cannot be held liable for any damage
caused as a result of missing or incorrect information in this document. In case of disputes the English version of
the instructions will be binding.
12 - EN

Electrical dangers

There is a risk of electric shock during installation
or maintenance. Always comply with the safety
regulations in this manual. Personal injury or
damage to the unit can arise from non-compliance
with the safety regulations, warnings, comments
and instructions in this manual. Disconnect the
power supply to the ComfoAir Q, Comfort Vent Q or
AERISnext (hereinafter referred to as the "ventilation
unit") before connecting up or removing something
from the unit.