Philips PerfectCare 9000 Série Mode D'emploi page 8

ENGLISH
10
21
350 ml
22
350 ml
23
Note: If you are performing the EASY DE-CALC procedure immediately after ironing, unplug the appliance and let it
cool down for at least two hours before you perform the procedure.
IMPORTANT – Descaling the soleplate
If you do not use the EASY DE-CALC function regularly, scale particles may build up in the soleplate and brown stains
may come out of the soleplate during ironing. In this situation, you need to descale the soleplate by following the
procedure below. We advice you to repeat the procedure twice to better clean the soleplate.
24
2 hr
3
Hold a cup (with a capacity of at least 350ml) under the EASY DE-CALC knob and
turn the knob anticlockwise (Fig. 21).
4 Remove the EASY DE-CALC knob and let the water with scale particles flow into the
cup (Fig. 22).
5 When no more water comes out of the appliance, reinsert the EASY DE-CALC knob
and turn it clockwise to fasten it (Fig. 23).
6
You can continue using your iron immediately after completing the EASY DE-CALC
procedure.
To avoid the risk of burns, unplug the appliance and let it cool down for at least two hours
before you descale the soleplate (Fig. 24).
1 Remove the plug from the wall socket.
2
Place the appliance on the edge of the tabletop.
3 Make sure that the water tank is empty.