Using Your Appliance - Philips PerfectCare 9000 Série Mode D'emploi

Masquer les pouces Voir aussi pour PerfectCare 9000 Série:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 49
Low water alert light
When the water tank is almost empty, the 'low water alert' light flashes. Fill the water tank and press the steam trigger
to let the appliance heat up again. When the 'iron ready' light lights up continuously, you can continue steam ironing.

Using your appliance

ActiveSense technology
Your appliance comes with the world's very first fabric sensing technology in irons called
ActiveSense. It works with artificial intelligence recognizing fabrics during ironing with built-in
camera, adjusting the ideal temperature and steam amount automatically. You can also leave your
iron on the ironing board without risk of burns.
The ActiveSense technology enables you to iron all types of ironable fabrics, in any order,
without adjusting the iron temperature setting.
The 'iron ready' light can light up steadily in either blue or white, corresponding to the level
of temperature/steam needed (normal and high for the respective light), based on the
fabric detected.
Fabrics with these symbols are ironable (Fig. 9), for example linen, cotton, polyester, silk,
wool, viscose and rayon.
Note: Do not iron on prints, even if the fabric around is ironable.
For certain delicate fabric and finishing (e.g: suede, velvet, metallic weaving, sequins), it is
recommended to steam a short distance above the garment.
Fabrics with this symbol are not ironable (Fig. 10). These fabrics include synthetic fabrics
such as Spandex or elastane, Spandex-mixed fabrics and polyolefins.
During ironing, you can place the iron either on the iron platform or horizontally on the
ironing board. Thanks to the ActiveSense technology, the soleplate will not damage the
ironing board cover (Fig. 11).
Note: There may be some steam observed when the iron is resting for a longer period of
time. This is normal as it is part of the system process to ensure the soleplate is at the
right temperature during rest. During this process, the 'iron ready' light will be breathing
in blue.
Note: Minimise touching the front of the iron as it will get warm.
ENGLISH
7
9
10
11

Publicité

Table des Matières
loading

Table des Matières