Philips 9000 Série Mode D'emploi page 35

Troubleshooting
Shaver
Problem
The appliance
does not work
when I press the
on/off button.
The appli­
ance does not
shave as well as
it used to.
This chapter summarizes the most common
problems you could encounter with the appliance.
If you are unable to solve the problem with the
information below, visit www.philips.com/support
for a list of frequently asked questions or contact
the Consumer Care Center in your country.
Possible cause
The appliance is still
attached to the wall
socket. For safety
reasons, the
appliance can only
be used without
cord.
The rechargeable
battery is empty.
The travel lock is
activated.
The shaving unit is
soiled or damaged
to such an extent
that the motor
cannot run.
The shaving heads
are damaged or
worn.
Hairs or dirt obstruct
the shaving heads.
English
Solution
Unplug the appliance and
press the on/off button to
switch on the appliance.
Recharge the battery see
'Charging' .
Press the on/off button for
seconds to deactivate the
travel lock.
Clean the shaving heads
thoroughly or replace
them. Also see 'Hairs or dirt
obstruct the shaving heads'
for a detailed description of
how to clean the shaving
heads thoroughly.
Replace the shaving heads
see 'Replacement' .
Clean the shaving heads in
the regular way or clean
them thoroughly.
35