Replacing The Cleansing Brush Attachment - Philips 9000 Série Mode D'emploi

32
English
1
2
3
1
2

Replacing the cleansing brush attachment

Place the retaining ring holder on the retaining
ring , place it on the shaving head
it clockwise
Repeat this process for the other retaining rings.
- Each retaining ring has two recesses that fit
exactly into the projections of the shaving
head holder. Turn the ring clockwise until
your hear a click to indicate that the ring is
fixed.
Note: Hold the shaving head holder in your
hand when you reinsert the shaving heads and
reattach the retaining rings. Do not place the
shaving head holder on a surface when you do
this, as this may cause damage.
Attach the shaving head holder to the bottom
part of the shaving unit click .
To reset the replacement reminder, press and
hold the on/off button for approx. seconds.
Wait until you hear two beeps.
The brush head should be replaced every
months or earlier if the brush hairs are deformed or
damaged see 'Replacing the cleansing brush
attachment' .
to reattach the retaining ring.
and turn