Technical Specifications - Hughes & Kettner TubeMeister Deluxe 20 Mode D'emploi

3.2 Manual Read-Out
TSC checks tubes' bias points to let your determine if pairs match. This is
easily done by inserting a pick into the appropriate slot while the amp is
on (rather than in Standby mode). The LEDs will flash. How many times
the LEDs flash matters, but what matters more is the difference in flash
counts. TSC will ensure optimum sound if the difference is no greater
than four flash signals. If the difference in flash counts is greater than four,
the device will continue operating safely so there is no real need to install
a matched set. However, a matched set of tubes will improve the tone.

4 Technical Specifications

TubeMeister Deluxe 20
Preamp tubes
Power tubes
Power output
Max. power consumption
Mains voltage tolerance range
Ambient operating tempera-
ture range
Mains fuse, 100 volts
Mains fuse, 120 volts
Mains fuse, 220-230 volts
Mains fuse, 240 volts
Input jack
Send jack
Return jack
Red Box AE Out
Speaker Out
Footswitch
Dimensions
Weight
2 x 12AX7 / ECC83
2 x EL84
20 watts
101 watts
+/-10%
0° to +35° C
250 V / T 1.25 A L
250 V / T 1 A L
250 V / T 630 mA L
250 V / T 630 mA L
6.3 mm (1/4"), unbalanced, 1 MΩ
6.3 mm (1/4"), unbalanced,
250 Ω, max. + 6 dBV
6.3 mm (1/4"), unbalanced,
500 kΩ, -3 dBV
XLR, balanced, 1360 Ω,
max +0 dBV
6.3 mm (1/4"), 8 to 16 Ω
6.3 mm (1/4"), stereo,
tip=Channel, ring=Boost
355 x 155 x 150 mm
5 kg
TubeMeister 20 Deluxe – Manual 1.3b
7