Eneo VKC-1416A/IR Mode D'emploi page 39

EFFECT
MIRROR Selection of right, left, reverse picture
PIP Picture-in-picture insert on or off (while the large image is frozen, the current camera image can be
seen in a small window).
FREEZE Select real an still picture
D/N Day & Night mode on/off
DNR Digital noise reduction mode on/off
CAUTION: Freeze mode is automatically off, when zoom and focus operation.
PRESET FOCUS Selection of automatic (AUTO) or manual (MANUAL) operation. In order to prevent a focus shift,
for example after a power failure, the setting „manual focus" must be stored before in the menu under
INIT with „Preset" and under SAVE with „Preset".
PUSHAF: the focus is held until the zoom button is pressed again.
NOTE: Continuous operation in AF mode is not recommended. Lifetime could be limited.
SYNC Internal or line lock mode
INIT Initializes camera (factory preset or saved settings).
LOAD Choose the camera parameters in the menu (factory preset or saved settings) during operation.
SAVE To store settings (power line interrupt) the programming has to be saved here (INIT setting on PRESET).
SHOT Select normal, DIS, WDR or Low-Shutter mode.
DIS (digital image stabilization), WDR (wide dynamic range)
ZOOM PRESET Select zoom preset number.
SET ZOOM You can set zoom position of zoom preset.
PRESET
39