Control Board - England's Stove Works 25-IP Guide D'installation Et D'utilisation

Control Board
The Control Board (Part # PU‐CBIP) is a digital read‐out board. This board offers a wide variety of
settings to operate the unit. The right side panel can be opened to remove the control board. The control
board can be removed from the unit by loosening the two outside screws and pulling the board down below the
mounting bracket. A 6‐amp "quick‐blow" fuse is used on this Control Board. *BEFORE REPLACING THE
CONTROL BOARD BE SURE THE UNIT IS COOLED COMPLETELY AND UNPLUGGED.*
NOTE: The bottom three control buttons are preset at the factory and are not user adjustable. See
the "Daily Operation" section on pages 17‐19 of the manual for more instructions on Control
Board settings.
Low Burn:
Medium Low:
Medium High:
High Burn:
IMPORTANT! READ AND FOLLOW ALL INSTALLATION AND MAINTENANCE INSTRUCTIONS, INCLUDING CLEANING
THE UNIT AS SPECIFIED, AND REPLACING GASKETS ANNUALLY, AND PARTS AS NEEDED.
ENGLAND'S STOVE WORKS IS NOT RESPONSIBLE FOR ANY DAMAGE OR INJURY INCURRED DUE TO NEGLECT,
OR DUE TO UNSAFE INSTALLATION OR USAGE OF THIS PRODUCT. CALL TECHNICAL SUPPORT WITH ANY
REPLACING COMPONENTS
Recommended Heat Ranges:
Heat Range setting: 1
Heat Range setting: 2 – 3
Heat Range setting: 4 – 8
Heat Range setting: 9
QUESTIONS.
Room Air Blower setting: 1
Room Air Blower setting: *
Room Air Blower setting: *
Room Air Blower setting: 9
*NOTE: Blower speed will
automatically be adjusted to
the desired heat range that you
select.
39