Transmitter Range Chart; Place The Boundary Flags - Petsafe IF-300 Mode D'emploi

Transmitter
Range Chart
Boundary Boundary
Control
Dial
Position
1
2
3
4
5
6
7
8
Note: These distances are approximate.

Place the Boundary Flags

Step
4
The Boundary Flags are visual reminders for your pet of where
the Boundary Zone is located. The Receiver Collar will activate
within 2 to 3 feet of the Boundary Flags.
1. Using the Test Light, with the Static Correction Level set at 2
or greater, hold the Receiver Collar at your pet's neck height
with logo side facing away from the Transmitter.
2. Walk towards the Boundary Zone until the Receiver Collar
beeps and the Test Light flashes. (4A).
3. Place a Boundary Flag in the ground (4B).
4. Walk back into the Pet Area until the beeping stops.
5. Repeat this process around the Boundary Zone until it is marked with Boundary Flags every 10 feet.
The Boundary Flags may be in different parts of the Boundary Zone and may not be in a line. The
Boundary Zone is 2 to 3 feet wide.
10
Boundary
Switch Switch
LOW HIGH
5-10 ft. 5-10 ft.
5-10 ft. 5-10 ft.
15-20 ft. 25-35 ft.
20-25 ft. 42-55 ft.
25-30 ft. 55-65 ft.
35-40 ft. 75-85 ft.
40-45 ft. 85-90 ft.
40-45 ft. 85-90 ft.
Record Your Settings
Final Boundary
Switch Setting
(HIGH or LOW)
Home
Camping
Vacation
Other
1-800-732-2677
Final Boundary
Control Dial
Position (1-8)
4A 4B
Receiver
Static Cor-
rection
Level (1-6)