Troubleshooting Guide - Fisher-Price SMART FIT PARK Mode D'emploi

Problem
No image on the TV
Low battery symbol
on TV screen
Image is stretched or distorted
on a wide screen TV
17

Troubleshooting Guide

Cause
TV or VCR is not set to
proper input
Batteries in the mat are weak
or dead
Battery compartment door
is loose
Plug-and-play cord
is disconnected
Batteries in the mat are weak
appears
Wide screen TV aspect ratio set
incorrectly
Solution
Press the channel down button
on the VCR or TV and check
for an INPUT channel below
channel 2.
Use the menu system on your
TV or VCR to find INPUT or
SOURCE. Change to INPUT
or SOURCE.
Refer to your TV's or VCR's
instruction manual.
Replace all batteries in the
mat with four, new "AA"
(LR6) alkaline batteries.
Fully tighten both screws in the
battery compartment door.
Make sure both ends of the
plug-and-play cords are fully
connected to the mat and your
TV or VCR.
Replace the batteries in the
mat with four, new "AA" (LR6)
alkaline batteries.
For best picture, do not use
a 16:9 aspect ratio (stretched)
wide screen setting. This product
is designed for a regular screen
TV with a 4:3 aspect ratio
(display setting). When viewed
on a wide screen TV, you will see
black bars on the sides of the
image. For more information on
changing the aspect ratio, refer
to your TV owner's manual.