gourmetmaxx FP7714 Mode D'emploi page 19

■ Turn off the device and pull the mains plug out of the socket before inserting or
removing the holder for the cutting insert to prevent the device from accidentally
activating!
■ Do not use the device continuously for more than two minutes!
■ Do not forcefully push food into the fi ll chute.
For best results when cutting and slicing, we recommend cutting foods into
smaller pieces before inserting them in the fi ll chute. This makes it easier to push
the foods down with the plunger.
Always follow the order described below when assembling the device:
1. Inserting the fi ll chute
2. Place the cutting insert in the holder for the cutting insert
3. Place the holder for the cutting insert in the device
Insert / remove the fi ll chute
Loading / removing the cutting inserts in the holder for the cutting insert
19
1. Hold the fi ll chute tilted slightly to the right so that the
arrow on the fi ll chute is pointing towards the open lock
symbol on the motor unit. Then place it in the motor unit.
2. Turn the fi ll chute to the left until it locks into place and
the arrow on the fi ll chute is pointing towards the closed
lock symbol.
3. To release the fi ll chute, turn the holder to the right until
the arrow on the fi ll chute is pointing towards the open
lock symbol again. Then remove the fi ll chute from the
motor unit.
1. Turn the locking mechanism on the back of the holder for
the cutting insert until the opening for the cutting inserts
is exposed.
2. Select a suitable cutting insert pair (also see chapter
"Product contents and device overview", section "Cutting
inserts").
3. Slide the desired cutting inserts into the opening. In the
process, make sure that the respective cutting insert is
correctly inserted on the front side and is not left to hang.
EN