Dremel 3D45 Consignes D'utilisation/De Sécurité page 9

Masquer les pouces Voir aussi pour 3D45:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

DM 2610047405AB 03-18_3D45 3/27/18 9:51 AM Page 9
Filament Runout Sensor
Filament Spool
.g, .gcode and .g3drem
Glue Stick
Leveling Knobs
Leveling Sensor
Lid
Needle Nose Pliers
Nylon
OBJ File
Object Removal Tool
PETG
PLA
Spool Holder
Spool Door
Stepper Motor
.STL File
Touch Screen
USB Flash Drive
WIFI
X-Axis Guide Rails
Y-Axis Guide Rails
Z-Axis Guide Rails
Glossary of Terms
A sensor in the extruder intake that pauses your printer if it runs out of filament
during a build.
A cylindrical piece on which a long strand of filament is wound for storage and
continuous use.
Buildable file formats compatible with your Dremel 3D45.
Non-toxic and acid-free stick of glue that is applied to the build platform to help prints
stick.
Knobs located under the base of the build platform that allow users to easily level the
build platform before each print.
A sensor that detects the height of the build platform and assists in proper leveling.
Your Dremel 3D45 has a pivoting lid on the top. This allows for more access to the
build platform, extruder, filament, and objects when necessary.
Common tool used to hold small objects and to grab excess material that may be too
hot to touch directly.
Synthetic polymer that provides strong and flexible prints with heavy wear resistance.
A common digital file format used in a wide range of 3D model software. This file is
created in 3rd party 3D software or downloaded from www.digilab.dremel.com.
A tool used to separate your objects from the build platform.
A thermoplastic filament that combines flexibility, strength and durability similar to
Nylon but is easier to print, similar to PLA.
A bioplastic derived from renewable resources such as corn starch.
A plastic piece located to the left of the build platform inside your Dremel 3D45 build
area that is designed to hold a filament spool.
A removable door which locks the filament spool to the spool holder.
A brushless DC electric motor used to drive the guide rails and extruder gears.
A common digital file format used in a wide range of 3D model software. This file is
created in 3rd party 3D software or downloaded from www.digilab.dremel.com.
Full color display that is touch activated. It allows you to monitor your Dremel 3D45
and objects while also providing commands directly to your Dremel 3D45 without the
use of a computer.
A portable memory card used on a wide array of devices.
A local area wireless networking technology that allow electronic devices to
communicate.
A set of rails on either side of the extruder that allow a stepper motor to move the
extruder to the left or right side of the build area.
A set of rails on either side of the build area that allow a stepper motor to move the
extruder to the front or back of the build area.
A set of rails located at the back of the build area that allow a stepper motor to move
the build platform up or down.
9

Publicité

Table des Matières
loading

Table des Matières