Installation Instructions; Ventilation - Atag HI4071M Notice D'utilisation

INSTALLATION INSTRUCTIONS

Ventilation

Above a control panel or an ATAG oven
The electronics in the appliance need cooling. The appliance
will automatically switch off if there is insufficient air circulati-
on.There are ventilation openings on the underside of the
appliance. It must be possible for cool air to be drawn in
through these openings. There are outlet openings on the
underside and at the front of the appliance.
Several alterations must be made to the kitchen unit to allow
optimal ventilation of the hob.
Ventilation occurs through the plinth and back of the oven. The
niche should be at least 600 mm high.
Make an opening of at least 560 x 6 mm at the front and back.
19
ventilation