OPERATING WITH COAL
Note: air wash control n° 1 must always be closed.
LIGHTING COAL
Place some tightly rolled paper/fire lighters and a little coal and kindling on
the grate. Open the direct draught damper (3) (pull the handle to the right).
Close air wash control n° 1, open the thermostat n°2 - light the paper and
leave it to ignite the kindling. After about 10 minutes (or longer with a poor
drawing chimney) when the fire has taken hold open the door and feed the
stove with coal, banking it up over the oscillating grate. Close the door.
Adjust the tempo of the fire by means of thermostat n° 2.
Close the direct draught damper (3)(push the handle to the left).
49
-
1
C07100DA352
+