Unpacking; Package Contents - Delta 36-6022 Guide D'utilisation

• The machine is heavy, two people are required to
unpack and lift.
• Prior to tool assembly and use, read this manual
thoroughly to familiarize yourself with proper
assembly, maintenance and safety procedures.
Check shipping carton for damage before unpacking.
Carefully remove components in top foam layer. Remove
the top layer of foam then remove all components in
the bottom layer of foam. Lay out all parts on a piece
of cardboard or other clean, flat surface. Two or more
people are needed to lift the saw out of the carton.
Always check for and remove protective shipping
PACKAGE CONTENTS DESCRIPTION (QTY)
A. Saw
B. Stand Handle
C. Wheels
D. Pedal Assembly
E. Right Support Rod
F. Left Support Rod
G. Support Rod Connection Tube
A
E
H
G
F

UNPACKING

materials around motors and moving parts. Do not
discard shipping carton and packing materials until you
have carefully inspected the contents, assembled the
machine and are satisfied that it operates correctly.
Compare package contents to Component Parts List and
Hardware Package List prior to assembly to make sure
all items are present. Carefully inspect parts to make sure
no damage occurred during shipping. If any parts are
missing, damaged or preassembled, do not assemble.
Instead call DELTA® Customer Care at 1-800-223-7278
for assistance.
After assembly remove any protective materials and
coatings from all the parts and the table saw.
H. Cross Connect Assembly
I1. Upper Stand Assembly Part 1
I2. Upper Stand Assembly Part 2
J. T-Square Fence
K. 10 in. Carbide Tipped Blade
L. Miter Gauge
M. Blade Guard Assembly
B
I1
I2
J
9
N. Anti-Kickback Pawls
O. Throat Plate
The following items can be found
in their respective storage areas
located on the saw:
a. Blade wrenches (2)
b. Push Stick
a
C
D
K
M
O
b
L
N