Instruction Manual - Makita UR100D Manuel D'instructions

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
No load speed
(without cutting tool)
Overall length
(without cutting tool)
Nylon cord diameter
Applicable cutting tool and
cutting diameter
Rated voltage
Standard battery cartridge
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Noise
Applicable standard : EN50636
Nylon cutting head
• Even if the sound pressure level listed above is 80 dB (A) or less, the level under working may exceed 80 dB
(A). Wear ear protection.
Vibration
Applicable standard : EN50636
Nylon cutting head
NOTE: The declared vibration emission value has been measured in accordance with the standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration emission value may also be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the power tool can differ from the declared emission
value depending on the ways in which the tool is used.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation of
exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when
the tool is switched off and when it is running idle in addition to the trigger time).
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Take particular care and attention.
Nylon cutting head
(P/N 198852-2 / 198853-0)
Type
Type
D.C. 10.8 V - 12 V max
BL1015 / BL1016 / BL1020B / BL1021B / BL1040B / BL1041B
Sound pressure level average
L (dB(A))
PA
74
Left hand
2
a (m/s ) Uncertainty K
h,W
(m/s
0.1
2.5
Read instruction manual.
Danger; be aware of thrown objects.
The distance between the tool and
bystanders must be at least 15 m.
8 ENGLISH
UR100D
-1
10,000 min
835 - 1,185 mm
1.65 mm
260 mm
1.9 - 2.1 kg
Uncertainty K (dB(A))
0.74
Right hand
2
a (m/s ) Uncertainty K
h,W
2
)
2.5
2
(m/s )
0.5