Joc_Fs1: Safe Boot Jumper; T_Sen1~2: Thermal Sensor Connectors; W_Flow1: Water Flow Meter Connector - MSI MEG X570S UNIFY-X MAX Présentation Rapide

JOC_FS1: Safe Boot Jumper

This jumper is used for Safe Boot. Once enabled, the system will boot with lower PCIe
(from CPU) mode.

T_SEN1~2: Thermal Sensor Connectors

These connectors allow you to connect the thermistor cable and use it to monitor the
temperature of the detection point.

W_FLOW1: Water Flow Meter Connector

This connector allows you to connect a flow meter to monitor the flow rate of your
liquid cooling system.
Normal Boot
(default)
Sense
GND
1 Ground
2 WFLOW PWR (2A)
Enabled
Boot with lower PCIe
(from CPU) mode for
Safe Boot.
Thermistor cable
1
3 WFLOW IN
Overview of Components
25