Publicité
Les langues disponibles
Les langues disponibles
Technical data
Model designation
Motor output P
1
Mains voltage
Mains frequency
Saw blade speed
Mains fuse
Hard metal saw blade ∅ maximum
Hard metal saw blade ∅ minimum
Saw blade thickness
Cut width
Number of teeth
Thickness of Splitting wedge
Saw blade location hole
Cutting speed (at maximum saw blade ∅)
Cutting height at 90° (for maximum saw blade ∅)
Cutting height at 45° (for maximum saw blade ∅)
Bevel cut adjustment (swivelling range)
Table size (without extension)
Table height (with stand) *
Table length extension *
Table width extension *
Weight (with stand) *
Exhaust outlet guard ∅
Exhaust outlet ∅
Commercial, small dust collectors or industrial vacuum cleaners are used for vacuuming.
* Only for ATS 250 TOP
You must not start up the machine until you have read these operating instructions, observed all the
information given and assembled the machine as described.
Keep the instructions in a safe place for future use.
Contents
Commissioning
TKS 250 C (ATS 250)
1700 W
230 V~
10 A inert
250 mm
245 mm
1,8 mm
2,8 mm
36
2 mm
16 mm
59
/
m
s
approx. 76 mm
approx. 67 mm
0° - 45°
640 x 470 mm
880 mm
640 mm x 255 mm
ca. 35 kg
ca. 33 kg
30 mm
30 mm
Symbols used in the operating instructions
1
10
Threatened hazard or hazardous situation. Not
10
observing this instruction can lead to injuries or cause
11
damage to property.
11
11
Important information on proper handling of the
11
saw. Not observing this instruction can lead to faults in
12
the saw.
13
User information. This information helps you to use all
13
the functions of the saw optimally.
14
15
Assembly, operation and servicing the saw. Here
œ
16
you are explained exactly what to do.
16
16
16
17
66-70
71
10
-1
Publicité
Chapitres
