Erreka MAGIC Guide Rapide D'installation Et Programmation page 7

1 Position the swivel plate (1),
respecting the height levels.
5 Make the four boreholes for the
top bracket (5). Use 6.5 mm drill
bit.
Ø
5 6,5mm
9 With the seal (T) in place, position
the top bracket (9) so that its slot
coincides with the protrusion of
the frame (R).
10 With the seal (S) in place, position
the top swivel (10).
T
R
Assembly
2 Using the
make 4 boreholes to secure the
operator (2) with a 10.5 mm drill
bit.
P248A
6 Introduce the operator and secure
w i t h t h e s c r e w s ( 6 ) . I n i r o n
f r a m e s , i n s e r t t h e P p l a t e
between the operator and the
frame.
7 Install the caps (7) to stop
water coming in.
P
6
P248D
11 Position the angle piece (11),
respecting the height levels.
12 Tighten the gland (12).
10
S
9
11
P248H
template provided, 3 Make (3) 6.5 mm holes.
4 Only operators with lock: make (4)
Ø
10,5 mm
P248B
8 Position the base (8) on the swivel
7
P248F
13 Position the attachment screws
14 Install the water guard (14).
12
P248I
21 mm boreholes.
Ø
21mm
Ø
6,5mm
plate (1).
Position the frame (M) on the base
(8), correctly coupling the drag
wheel with the swivel.
M
(13).
13
P248C
8
1
P248G
14
13
P248J
7