Braun Silk-épil EverSoft Solo 2170 Mode D'emploi page 6

If you have any doubts about using
this appliance, please consult your
physician. In the following cases, this
appliance should only be used after
prior consultation with a physician:
– eczema, wounds, inflamed skin
reactions such as folliculitis
(purulent hair follicles) and
varicose veins
– around moles
– reduced immunity of the skin,
e.g. diabetes mellitus, during
pregnancy, Raynaud's disease
– haemophilia or immune
deficiency.
Silk·épil is designed to remove hair
on legs, but can also be used on all
sensitive areas like forearms,
underarms or the bikini line.
When switched on, the appliance
must never come in contact with
the hair on your head, eyelashes,
ribbons, etc. to prevent any danger of
injury as well as to prevent blockage
or damage to the appliance.
Some useful tips
For the first use or if not having
epilated for a long time, we
recommend that you first shave
longer hairs. After 1–2 weeks, it is
much easier and more comfortable
to epilate the regrowing, short hairs.
Before epilating, you may as well
pre-cut long hairs to a length of 2 to
5 mm.
Hair is easier to remove after bathing
or showering. However, hair and
skin must be completely dry. After
epilating, we recommend applying a
moisture cream to relax the skin and
relieve slight skin irritations.
In the beginning, it is advisable to
epilate in the evening, so that any
possible reddening can disappear
overnight.
The fine hairs which regrow might
not manage to get trough to the
skin surface. In order to prevent
in-growing hairs, we recommend the
regular use of massage sponges
(e.g. after showering) or exfoliation
peelings. By a gentle scrubbing
action, the upper skin layer is
removed and fine hairs can get
through to the skin surface.
How to epilate
• Your skin must be dry and free
from grease or cream.
• Before starting off, thoroughly
clean the epilator head
• Put on the epilator head and make
sure that the EverSoft attachment
is in place.
1
• Plug the cord connector
the socket
5
former plug
7
outlet.
1. To turn on the appliance, slide
switch up to setting «2»
4
(«2» = normal epilation,
«1» = gentle epilation).
2. Rub your skin to lift short hairs.
In order to make best use of the
EverSoft attachment, hold the
appliance at right angles (90°)
.
2
into
6
and plug the trans-
into an electrical
7