Storage And Transport; Maintenance; Disposal And Recycling - Scheppach NTS30 Premium Traduction Des Instructions D'origine

• Clean the foam filter (b) with a little soap and running water and then leave it to air dry.

11. Storage and Transport

Store the device and its accessories in a dark, dry and frost-proof place that is inacces-
sible to children. The optimum storage temperature is between 5 and 30˚C.
Store the electrical tool in its original packaging.
Cover the electrical tool in order to protect it from dust and moisture.
Store the operating manual with the electrical tool.
• Wind the mains cable (3) around the top cable holder (12). (Fig. P)
• There are four recesses on the top side of the caster mounting base (6) for storing the
floor nozzle (e), the joint nozzle (f) and the metal extension tube (g). (Fig. Q)
• The remaining accessories can be stored in the stainless steel container (8).

12. Maintenance

Warning!
Disconnect the mains plug before carrying out any maintenance work.
Connections and repairs
Connections and repairs of electrical equipment may only be carried out by an electrician.
Please provide the following information in the event of any enquiries:
• Type of current for the motor
• Machine data - type plate
• Motor data - type plate
Service information
Please note that the following parts of this product are subject to normal or natural wear and
that the following parts are therefore also required for use as consumables. Wear parts*:
Foam filter, Paper filter bag, Folded filter for dry vacuuming
* Not necessarily included in the scope of delivery!

13. Disposal and recycling

The equipment is supplied in packaging to preven it from being damaged in transit.
The raw materials in this packaging can be reused or recycled. The equipment and
its accessories are made of various types of material, such as metal and plastic.
Defective components must be disposed of as special waste. Ask your dealer or
your local council.
 www.scheppach.com /  service@scheppach.com /  +800 4002 4002
GB | 31