Installation - Scheppach NTS30 Premium Traduction Des Instructions D'origine

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 33

8. Installation

m IMPORTANT!
Prior to use, ensure that the device has been correctly and fully assembled.
Unpacking (Fig. A, B, C)
• Release the locking hooks (4) and remove the machine head (2). The accessories are lo-
cated inside the stainless steel container (8). Only the metal extension tube (g) is located
outside the stainless steel container (8) in the packaging. Remove all of the accessories
from the stainless steel container (8).
Installing the castor mounts (5a) (Fig. D)
• Turn the stainless steel container (8) upside-down. (The machine head (2) must be re-
moved).
• Push the castor mounts (5a) into the cut-outs provided on the wheel mounting base (6)
Installing the castors (5) (Fig. D)
• Press the four castors (5) into the holes in the castor mounts (5a).
Installing the machine head (2) (Fig. E)
• Place the machine head (2) on the stainless steel container (8). Secure the machine head
(2) with the locking hooks (4). When installing the machine head (2), ensure that the lock-
ing hooks (4) latch into place correctly.
Installing the foam filter (b) (Fig. F)
Never use the device without filter! Always ensure that the filters are correctly fitted!
• Installing the foam filter (b): For wet vacuuming, slide the foam filter (b) provided over the
filter basket with safety float valve (14).
Installing the HEPA filter (d) (Fig. G)
For dry vacuuming, slide the HEPA filter (d) provided over the filter basket with safety float
valve (14).
Installing the paper filter bag (c) (Fig. H)
It is recommended to use an additional paper filter bag (c) when vacuuming fine, dry dirt.
• Slide the paper filter bag (c) over the suction opening in the stainless steel container (8).
The paper filter bag (c) is only suitable for dry vacuuming. The paper filter bag (c) makes
it easier to dispose of the dust collected.
Installing the suction hose (a) (Fig. I)
Connect the suction hose (a) to the corresponding port, depending on the desired use, on
the wet and dry vacuum.
28 | GB
 www.scheppach.com /  service@scheppach.com /  +800 4002 4002

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

5907720901

Table des Matières