Dry vacuuming (Fig. G, H)
Use the HEPA filter (d) for dry vacuuming. The paper filter bag (c) can be used in addition.
This ensures that the HEPA filter (d) remains free of dust for longer and maintains the vac-
uum power for longer.
In addition, the disposal of the dust is also easier.
Always ensure that the filters are correctly fitted.
Wet vacuuming (Fig. F)
Use the foam filter (b) for wet vacuuming. Ensure that the foam filter (b) is correctly fitted.
If the stainless steel container (8) is full, the safety float valve (14) closes the suction port
and suction operation is interrupted.
m IMPORTANT!
The device is not suitable for vacuuming flammable liquids. For wet vacuuming, use the
only the foam filter (b) provided.
Water drain plug (7) (Fig. O)
The stainless steel container (8) is equipped with a water drain plug (7) in order to make it
easier to drain. Open the water drain plug (7) by turning it counter-clockwise and drain out
the liquid.
10. Cleaning
m WARNING!
Prior to any adjustment, maintenance or service work disconnect the mains power plug!
Cleaning
It is recommended to clean the device after each use. Do not spray the device with water or
clean it under running water. This can result in electric shocks and can damage the device.
Empty the stainless steel container (8) after each use: After opening the screw cap (7) to
drain out the liquids, the liquid collected can be drained out. Residual liquid remains in the
stainless steel container (8).
To remove residual liquid, take off the machine head (2) by releasing the locking hooks (4)
from the stainless steel container (8). Pour out the liquid residue. Clean the container with
a damp cloth.
• Replace paper filter bag when full
• Always keep the device clean. Do not use cleaning agents or solvents.
• Keep the ventilation slots clean and free of dirt and dust.
• Clean the device only with a soft brush or a damp cloth.
30 | GB
www.scheppach.com / service@scheppach.com / +800 4002 4002