HP LineJet Série Guide De Référence Rapide page 41

A Thin Paper
B Medium Paper
C Thick Paper
7.
Lower the forms thickness lever. Set it to match the paper
thickness.
The A-B-C scale corresponds approximately to 1-, 3-, and 6-
part paper thickness. Adjust until you have the desired print
quality.
Caution Do not set the forms thickness lever too tightly; excessive
friction can cause paper jams, ribbon jams with potential for
ribbon damage, smeared ink, or wavy print.
8.
Press CLEAR to clear the fault condition.
9.
Press SET TOF. The paper moves down to the print position
and aligns to the top-of-form.
If there is any data in the input buffer, the paper moves to the
same relative position on the new page corresponding to the
last print position. The new top-of-form setting is retained in the
printer memory.
10.
Press ON LINE and close the printer cover.
Setting Top-Of-Form
41