HP LineJet Série Guide De Référence Rapide page 43

Cabinet Model
Paper Slot
3.
Locate the paper slot inside the cabinet and feed the paper up
through the slot.
Note It may be easier to feed one corner of the new paper up through
the slot first. When this corner can be grasped from the top,
rotate the paper back to the normal position. If necessary, gently
press the existing paper back.
Hold the paper to prevent it from slipping down and through the
paper slot.
Note If you are using multi-part paper and it is too thick for the new
paper to be loaded over the existing paper, go to step 12.
Reloading Paper
Pedestal Model
Paper Slot is 8"
below printer base
43