HP LineJet Série Guide De Référence Rapide page 28

Chapter 1
Basic Operating Procedures
SET TOF (Top-of-Form)
Cabinet Model:
Pedestal Model:
Function
Action
Result
Sets the top-of-form on the printer. This key is active
only when the printer is offline. It will not operate if the
printer is in a fault condition.
Raise the forms thickness lever; align the top of the
first print line with the TOF indicator on the tractor;
close the forms thickness lever; then press SET TOF.
(See page 38 for a complete procedure.)
The paper moves down to the print position and aligns
to the top-of-form.
If there is any data in the input buffer, the paper will
move to the same relative position on the new page
corresponding to the last print position. The new top-
of-form setting is retained in printer memory.
28